Skip to main content

Library News

3D Printing Continues at the Library!

by Laura Gleason on 2018-02-20T16:05:34-07:00 in 3D printing, Eli M. Oboler Library, Computer Science and Technology | Comments

Spring 2018 3D Prints, Library has a Makerbot Replicator+ 3D printer

ISU Libraries has started charging for 3D printing based on the size of the model. The cost will be either $1.00 or $2.00 per .stl file submitted depending on the size of the model.

  • Models that measure up to 10.0 L x 10.0 W x 12.5 H cm [3.9 L x 3.9 W x 4.9 H in.] cost $1.00.

  • Models that measure from 10.1 L x 10.1 W x 12.6 H cm [3.91 L x 3.91 W x 4.91 H in.]  to 29.5 L x 19.3 W x 16.0 H cm [11.6 L x 7.6 W x 6.3 H in.] cost $2.00.

  • Payable in cash at the circulation desk upon pickup.

  • Cost is per .stl file submitted.

  • Cost of print jobs that fail due to design errors will be assessed to the patron.

  • Cost of print jobs that fail due to ISU Libraries staff error or to hardware failure is the responsibility of ISU Libraries.

ISU Libraries will assume ownership of completed print jobs not picked up after 7 business days and reserves the right to deny future print requests to that patron.

Check out our full Printing Policy on 3D printing for further information. 

Tania Harden

Digital Initiatives Librarian


 Add a Comment

0 comments.

  Subscribe



Enter your e-mail address to receive notifications of new posts by e-mail.

  Archive



  Back to Blog Home
This post is closed for further discussion.

title
Loading...
Get Online Access Support
• Eli M. Oboler Library • 850 S. 9th Avenue • Stop 8089 • Pocatello, Idaho, USA 83209 • Site Feedback - Library Webmaster
Licensing Restrictions for Use of Electronic Resources